Assignment: Biology Sources of Energy Questions

Assignment: Biology Sources of Energy Questions

Question Description

I’m working on a biology question and need an explanation to help me learn.

 

1.Why is it urgent that we develop alternatives to fossil fuels?

2.Briefly discuss environmental impacts and economics of solar energy.

3.Briefly discuss environmental impacts and economics of wind energy.

4.Discuss briefly the significance of hydrogen as an alternative energy resource.

5.Is the use of biofuels for power generation economically feasible and sustainable? Why or why not?

The flowing water and the tides in the sea are sources of energy. India is endowed with large hydropower potential of 1,45,320 MW. Heavy investments are made on large projects. In recent years, hydel energy (through mini and small hydel power plants) is also used to reach power to remote villages which are unelectrified. The estimated potential of Small Hydro Power is about 15,000 MW in the country. As on Oct. 2021, the installed capacity of Small hydro projects (upto 3MW) amounts to 4821.81 MW.

Advantages of Small Hydro Power as an energy source

Reliable, eco-friendly, mature and proven technology.
More suited for the sensitive mountain ecology.
Can be exploited wherever sufficient water flows -along small streams, medium to small rivers and also harness abundant sun-shine, wind-energy and other bio-energy sources.
Does not involve setting up of large dams or problems of deforestation, submergence or rehabilitation.
Non-polluting, entails no waste or production of toxic gases, environment friendly.
Small capital investment and short gestation period.
Minimal transmission losses.
With careful planning and adoption of simplified and standardized designs, SHP installations are becoming increasingly competitive with thermal, diesel or gas based power generation.

Ocean energy

Oceans cover 70 percent of the earth’s surface and represent an enormous amount of energy. Although currently under-utilised, Ocean energy is mostly exploited by just a few technologies: Wave, Tidal, Current Energy and Ocean Thermal Energy.

Tidal Energy : The tidal cycle occurs every 12 hours due to the gravitational force of the moon. The difference in water height from low tide and high tide is potential energy. Similar to traditional hydropower generated from dams, tidal water can be captured in a barrage across an estuary during high tide and forced through a hydro-turbine during low tide. The capital cost for tidal energy power plants is very high due to high civil construction and high power purchase tariff. To capture sufficient power from the tidal energy potential, the height of high tide must be at least five meters (16 feet) greater than low tide. Total identified potential of Tidal Energy is about 12455 MW, with potential locations identified at Khambat & Kutch regions, and large backwaters, where barrage technology could be used.
Wave Energy : Wave energy is generated by the movement of a device either floating on the surface of the ocean or moored to the ocean floor. Many different techniques for converting wave energy to electric power have been studied. Wave conversion devices that float on the surface have joints hinged together that bend with the waves. This kinetic energy pumps fluid through turbines and creates electric power. Stationary wave energy conversion devices use pressure fluctuations produced in long tubes from the waves swelling up and down. This bobbing motion drives a turbine when critical pressure is reached. Other stationary platforms capture water from waves on their platforms.

This water is allowed to runoff through narrow pipes that flow through a typical hydraulic turbine. The total theoretical potential of wave energy in India along the country’s coast is estimated to be about 40,000 MW – these are preliminary estimates. This energy is however less intensive than what is available in more northern and southern latitudes.
Current Energy : Marine current is ocean water moving in one direction. This ocean current is known as the Gulf Stream. Tides also create currents that flow in two directions. Kinetic energy can be captured from the Gulf Stream and other tidal currents with submerged turbines that are very similar in appearance to miniature wind turbines. Similar to wind turbines, the movement of the marine current moves the rotor blades to generate electric power.
Ocean Thermal Energy Conversion (OTEC) : Ocean thermal energy conversion, or OTEC, uses ocean temperature differences from the surface to depths lower than 1,000 meters, to extract energy. A temperature difference of only 20°C can yield usable energy. Research focuses on two types of OTEC technologies to extract thermal energy and convert it to electric power: closed cycle and open cycle. In the closed cycle method, a working fluid, such as ammonia, is pumped through a heat exchanger and vaporized. This vaporized steam runs a turbine. The cold water found at the depths of the ocean condenses the vapor back to a fluid where it returns to the heat exchanger. In the open cycle system, the warm surface water is pressurized in a vacuum chamber and converted to steam to run the turbine. The steam is then condensed using cold ocean water from lower depths. OTEC has a theoretical potential of 180,000 MW in India subject to suitable technological evolution.

Important information for writing discussion questions and participation

Welcome to class

Hello class and welcome to the class and I will be your instructor for this course. This is a -week course and requires a lot of time commitment, organization, and a high level of dedication. Please use the class syllabus to guide you through all the assignments required for the course. I have also attached the classroom policies to this announcement to know your expectations for this course. Please review this document carefully and ask me any questions if you do. You could email me at any time or send me a message via the “message” icon in halo if you need to contact me. I check my email regularly, so you should get a response within 24 hours. If you have not heard from me within 24 hours and need to contact me urgently, please send a follow up text to

I strongly encourage that you do not wait until the very last minute to complete your assignments. Your assignments in weeks 4 and 5 require early planning as you would need to present a teaching plan and interview a community health provider. I advise you look at the requirements for these assignments at the beginning of the course and plan accordingly. I have posted the YouTube link that explains all the class assignments in detail. It is required that you watch this 32-minute video as the assignments from week 3 through 5 require that you follow the instructions to the letter to succeed. Failure to complete these assignments according to instructions might lead to a zero. After watching the video, please schedule a one-on-one with me to discuss your topic for your project by the second week of class. Use this link to schedule a 15-minute session. Please, call me at the time of your appointment on my number. Please note that I will NOT call you.

Please, be advised I do NOT accept any assignments by email. If you are having technical issues with uploading an assignment, contact the technical department and inform me of the issue. If you have any issues that would prevent you from getting your assignments to me by the deadline, please inform me to request a possible extension. Note that working fulltime or overtime is no excuse for late assignments. There is a 5%-point deduction for every day your assignment is late. This only applies to approved extensions. Late assignments will not be accepted.

If you think you would be needing accommodations due to any reasons, please contact the appropriate department to request accommodations.

Plagiarism is highly prohibited. Please ensure you are citing your sources correctly using APA 7th edition. All assignments including discussion posts should be formatted in APA with the appropriate spacing, font, margin, and indents. Any papers not well formatted would be returned back to you, hence, I advise you review APA formatting style. I have attached a sample paper in APA format and will also post sample discussion responses in subsequent announcements.

Your initial discussion post should be a minimum of 200 words and response posts should be a minimum of 150 words. Be advised that I grade based on quality and not necessarily the number of words you post. A minimum of TWO references should be used for your initial post. For your response post, you do not need references as personal experiences would count as response posts. If you however cite anything from the literature for your response post, it is required that you cite your reference. You should include a minimum of THREE references for papers in this course. Please note that references should be no more than 5 years old except recommended as a resource for the class. Furthermore, for each discussion board question, you need ONE initial substantive response and TWO substantive responses to either your classmates or your instructor for a total of THREE responses. There are TWO discussion questions each week, hence, you need a total minimum of SIX discussion posts for each week. I usually post a discussion question each week. You could also respond to these as it would count towards your required SIX discussion posts for the week.

I understand this is a lot of information to cover in 5 weeks, however, the Bible says in Philippians 4:13 that we can do all things through Christ that strengthens us. Even in times like this, we are encouraged by God’s word that we have that ability in us to succeed with His strength. I pray that each and every one of you receives strength for this course and life generally as we navigate through this pandemic that is shaking our world today. Relax and enjoy the course!

Hi Class,

Please read through the following information on writing a Discussion question response and participation posts.

Contact me if you have any questions.

Important information on Writing a Discussion Question

  • Your response needs to be a minimum of 150 words (not including your list of references)
  • There needs to be at least TWO references with ONE being a peer reviewed professional journal article.
  • Include in-text citations in your response
  • Do not include quotes—instead summarize and paraphrase the information
  • Follow APA-7th edition
  • Points will be deducted if the above is not followed

Participation –replies to your classmates or instructor

  • A minimum of 6 responses per week, on at least 3 days of the week.
  • Each response needs at least ONE reference with citations—best if it is a peer reviewed journal article
  • Each response needs to be at least 75 words in length (does not include your list of references)
  • Responses need to be substantive by bringing information to the discussion or further enhance the discussion. Responses of “I agree” or “great post” does not count for the word count.
  • Follow APA 7th edition
  • Points will be deducted if the above is not followed
  • Remember to use and follow APA-7th edition for all weekly assignments, discussion questions, and participation points.
  • Here are some helpful links
  • The is a great resource

 

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *